nmrbearing.com

• [PR]
  ×

  [PR]上記の広告は3ヶ月以上新規記事投稿のないブログに表示されています。新しい記事を書く事で広告が消えます。

  • 2025/02/02 12:15
• More attention should be paid to make its performance more stable
  If the reliability is better, more attention should be paid to make its performance more stable. Buy directly from professional manufacturers, not only the variety is complete, but also the performance is stable, and it can still maintain a relatively good effect in a high load carrying environment. It is better to choose products, which need to be determined according to the requirements, which will certainly greatly promote the acquisition of better services.
  
  After all, the better products bring more prominent advantages in use. If you choose from a professional point of view, it will be helpful to purchase high-quality physical ferrule needle roller bearings. After all, they will have a good performance in actual transmission, and then have Wholesale non-standard bearings suppliers a larger footprint, so as to Can play a greater role in actual use.
  
  Of course, when we make equipment selection, we should determine it according to the requirements, which will definitely be of great help to obtain better service. In order to be able to purchase better quality products, we still have to deal with their performance characteristics, which will be able to have a more prominent performance in terms of service standards.
  
  Since the advantages of physical ferrule needle roller bearings are relatively clear, and they can play a greater role in use, in order to be able to choose a better service organization, there should be a more comprehensive understanding. Only in terms of quality is better, or should be selected according to needs to ensure that better performance can be achieved.
  
  It is precisely because the solid ferrule needle roller bearing is composed of one or two ferrules and a needle roller with a cage, it performs better in transmitting power and takes up less space. Although the bearing is light in weight and occupies a small space, it is said to be small in size and high in load capacity, and it is used in many fields
  PR
  • nmrbearing.com
  • 2020/09/08 09:57
  • 0
• There is also a method for fixing needle roller bearings
   In addition, there is also a method for fixing needle roller bearings. In the whole structure, the needle roller bearing used is used as a floating fulcrum, and the outer ring of the bearing needs to be fixed to the machine base.
  
  When the needle roller bearing is officially installed, there should be an axial gap of 0. If only one end of the needle roller bearing is fixed in both directions, and the other end is kept in the swimming state, it can ensure that the bearing can move freely when it is elastic.In order to give full play to the effect of the bearing in the machine, in addition to selecting the type and type that matches the system, the correct combination structure design must be carried out.25mm-0.
  
  In order to prevent loosening and falling, the internal scale and shaft direction of the floating bearing are fixed. This needle roller bearing is also the same. If the two ends are fixed, each bearing separately receives a bearing force in one direction. However, this fixing method restricts the bidirectional Clutch Release Bearing manufacturers movement of the needle roller bearing, so it is generally suitable for use on some shafts where the operating temperature does not change much.
  
  These are the guidelines for demand to reach, otherwise the needle bearing will Can't work properly. The time of use should also consider the thermal elongation and the compensation between the bearing cover and the outer end surface.4mm, which can be adjusted by gaskets or screws. The fixed end of the needle roller bearing is mainly the two-way axial force received by the single bearing or the bearing group.
  
  At this time, a small amount of thermal expansion is allowed during shaft operation. The free elasticity of the bearing is ensured by the swimming between the roller and the ring, so that the bearing can work normally. What is included in the combined design of the needle roller bearing? The combined structure design of the needle roller bearing includes the shaft support end structure; the cooperation of the bearing and related parts; the lubrication and sealing of the bearing; and the improvement of the rigidity of the bearing system, etc. 
  • nmrbearing.com
  • 2020/09/02 10:57
  • 0
• Bayesian interval evaluation of rolling bearing performance
  Aiming at the problem that the Bayesian prior density function is difficult to determine, this chapter uses robust data to establish the Bayesian prior density function, and obtains the Bayesian posterior density function according to the prior density function and the distribution law of the experimental data. Therefore, there should be an estimation range and accuracy.
  
  Usually, the posterior density function is first calculated from the prior density function and experimental data, and then the interval of the parameter θ is obtained according to the posterior density function, that is, the Bayesian evaluation interval. However, it is not enough to give only one data, because the experimental data of rolling bearing performance is only an approximation of the sample, so this point estimate is only an approximation of the performance parameters of the rolling bearing.
  
  And then calculate the parameter interval estimation under a certain confidence level according to the Bayesian posterior density function.... Rolling bearing performance point estimation In the rolling bearing performance point estimation, assuming that the estimated parameter Mechanical ball bearing manufacturers is day, an estimate of the unknown parameter θ can be recorded as θ(X1, X2,. In Bayesian evaluation, the posterior density function occupies a very important position. Rolling bearing performance interval estimation assumes that the distribution function of rolling bearing performance is F(X; θ), θ is the quantity to be estimated..
  
  Bayesian interval evaluation of rolling bearing performance: 1. In order to make up for the shortcomings of point estimation in this respect, interval estimation of rolling bearing performance parameters can be used.
  • nmrbearing.com
  • 2020/08/25 14:34
  • 0
• Its value is close to the uniform value of the data set
  The friction torque data of A and B rolling bearings The variance decreases monotonically. The degree of significance is determined according to the data request. According to modern statistics, the recommended value range is 0~0. According to the improved HuberM method on the vibration data of C rolling bearing and the friction torque data of A and B rolling bearings, it can be seen that the variance of the vibration data of C rolling bearing is complicated within the significance level of 0 to 0.
  
  When the data has no discrete data, its value is close to the uniform value of the data set. This phenomenon does exist under ideal conditions.Discrete data and the errors of some conditions bring great difficulties to data analysis, and even severely destroy the data and bring wrong analysis results.. When the data has discrete data, the uniform value will be far away from the true value, and the median does not deviate from the true value, clarifying that the median is robust.
  
  The progress analysis provides a reliable guarantee. For data processed by the improved HuberM method, the impact of discrete data on the overall data is reduced, and the significance degree is improved.1. Some of these theories need to be improved and perfected, such as the similarity between the median and the average value, and the degree of significance of the data, which still lack theoretical basis.
  
  Therefore, the difference between the median and the mean value can be used to judge whether there is discrete data in the data. The improved HuberM method is used to process the data. The median is a very robust non-standard bearings parameter in data analysis. If the average value is getting closer and closer to the median, it means that there is no discrete data in the data; if the average value is more and more deviating from the median, it means that there is discrete data in the data
  • nmrbearing.com
  • 2020/08/18 10:26
  • 0